Calculate your saving with kortta fiber

Kortta HPS200 Hyper Plasticizer

Kortta HPS200 Hyper Plasticizer

Description:
Kortta HP110 is a normal hyper plasticizer based on polycarboxylate and legno which can provide more lasting for slump during the casting. Kortta HP100 is intended for concrete with relatively low water to cement ratio (almost less than 0.4) in normal condition. Moreover, this product is designed to reach homogenous fiber distribution in concrete.

 

Application:
Kortta HP110 has been developed for uses in:

  • Cast in place concrete
  • Fiber reinforced concrete
  • Self-compacted concrete (SCC)
  • Cement base mortars
  • Precast product
  • More lasting of slump during the casting

 

Benefits:
The benefits of using this hyper plasticizer are as follows:

  • Increase slump
  • Help fibers to have homogenous distribution in concrete
  • Avoid segregation
  • Lower permeability and increase durability
  • Improve pump ability of concrete

 

Dosage:
The normal dosage of this hyper plasticizer is generally in the range of 0.3 to 1% by weight of cement per cubic meter of concrete. (It is noteworthy that cementitious materials include Portland cement, microsilica, slag, fly ash and other pozzolanic base materials). Moreover, the exact amount of using this additive is determined according to the application and the expected level of the concrete slump. For more information you can contact the technical experts of this unit.

 

Packaging:
Default packaging is 20 kg and containers 200 kg drums.

 

Mixing:
Add the proper amount of this product to the concrete mixing water or to the ready-mixed concrete and then consider the mixing time for a range of 3 to 5 minutes. After complete mixing, start casting.

Storage:
This product has a minimum shelf life of 12 months provided the temperature is kept within the range of 5 to 35 cº.

Notification 021-88752902 Telegram 09036258539 Instagram